Change the battery in Surface Pen
No clip
Surface Pen with no clip
- Pull the top end straight out from the bottom.
- Replace the AAAA battery with the positive (+) end of the battery pointing toward the tail end of the Pen.
- Align the flat sides of the Pen and push the two parts back together.
Single button on flat edge
Surface Pen with single button on flat edge
– Turn the cap (the eraser end) counter-clockwise until you hear and feel it click into place (about 30 degrees). Gently pull the cap straight out from the body.
– Replace the AAAA battery with the positive (+) end of the battery pointing toward the tail end of the Pen.
– Line up the metal guide bump on the cap with the half-circle cutaway on the Pen body, and slide the cap back into place.
– Turn the cap a little bit to align the flat edges.
Two side buttons
- Surface Pen with two side buttons
- Unscrew the top of the Pen from the bottom.
- Replace the AAAA battery with the positive (+) end of the battery pointing toward the writing tip.
- Screw the top back on.
